Traction: It's All About the Footprint and Ground Contact Area
The ATI Track Module footprint is approximately
75" long by 36" wide
and offers about 2700 square inches of ground contact area per track.
While the footprint of a typical tire will vary greatly, depending on softness
of material and amount of air or liquid in the tire, the ATI Track Module footprint
offers many times the ground contact area of the original tire size specified
for your machine. In addition, the Track Module System provides a softer, smoother
ride plus increased flotation and traction with decreased compaction and pumping.
Swapping Tracks for Tires is Easy
Each track assembly is equipped with an adapter assembly
specifically designed to mate your new ATI Track Module System with the existing
machine's drive assembly. After initial installation the swap takes about 1-1/2 hours per track, so you
can upgrade a four-wheel machine in less than a day.
ATI, Inc.
103 Brown Street
P.O. Box 686
Mt. Vernon, IN 47620
email sales@ati-tracks.com